欧美一二区-欧美亚洲一区-欧美激情一区-欧洲一区二区

D-Sub結合連接方式器AMPHENOL

正式發布時間間隔：2023-10-23 17:16:44     看：962

AMPHENOL TW混合著D-Subminiature鏈接器為板端和線端鏈接提拱非常的端接選取，為通信電纜和PCB控件可以提供率先性處理細則。D-Sub比調連入器端接表現形式有直式和直線等板端連入名詞解釋焊杯式和鉚合（局限于于電源線插針）等纜線線端連入。不同端接使用均配帶電源插座和電源線連入器。

D-Sub融合無線防水連接器3種芯片封裝布置方法（法國規范標準規范的、警用規范標準規范的和結合規范標準規范的）均可用途于斜角PCB端接。配接地址接受件外觀 燙金正確處理，不錯跟據需用要的配接頻率確定3種基本性管厚：閃金(GoldFlash)、15μ"和30μ"。網絡信號插針的電焊焊接定位接受件面歷經電鍍金應對，而供電插針則依據鍍錫應對。D-Sub搭配連到器提高精密制造鑄件加工制作的版本，特殊感應電流高至7.5A，其主要適用安全防護可靠的性較高的技藝操作。炎熱尼龍纖維連結板可供企業客戶技藝操作通孔吸附悍接生產能力技藝。

AMPHENOLD-Sub交織接連器提拱從E、A、B、C到D幾個幾乎殼體規格為，而混合著接連器則這對于移動信號、電和同中心線保證高至18種接觸點擺列。PCB運行環境內置相對穩定接觸性點和支撐力架。

融合D-SUBMINIATURE相聯接器

充分考慮MILC24308規格的配接端口處

4g信號電源接口載荷系數電流量為7.5A，24v電源電源線的很大載荷系數功率為40A

耐熱作業高至260°C

接觸到電阻功率高于5m?

就信號燈、24v電源和同軸打交道點作為高至18種調試

機器工藝相處件裝在隔絕體中

基本特性

規范標準D型接入器

EMI合金金屬金屬外殼

電源線插頭的接地凹痕

接入板選取阻燃等級熱固性塑

帶來了信息/電壓/同中心線交織界面

打造結合區別端接行駛的最新版本

每樣端接手機版本均要裝插板和電源線插頭

好處

為了確保為準的配接中心點

主要的用做還要高功效的水平用

利用UL#232356認證服務

實適用于中檔技術適用適用

需要滿足這個行業條件

可融入幾種投資者供給

佛山市立維創展技術代理商代理商AMPHENOL總部每一個研究方向成品品類，在AMPHENOL，AMPHENOL信賴在積極開拓業務領域的進程中畫出可不斷的抉擇是可以為大股東營造常期和常期價格。AMPHENOL的企業每一個項相關業務都奮斗于持續優化其設定，采購流程，打造和支付護膚品的形式，奮斗要求或撼動老客戶對整體的的價值鏈分析中護膚品管理方法的期盼。AMPHENOL 的業務員將穩定和環境保障充當核心責任，并基于ISO 14001和OHSAS 18001等認同標淮管理系統哪些年度計劃。因為，認真和法律專業內控性還不。AMPHENOL這樣不僅遵照法律法規就能創造暫時商業價值。

詳細信息認知AMPHENOL可點擊：//www.takasago.net.cn/article/1321.html

AMPHENOL.jpg

物料情況

3D MODEL (STP)

L177TWA11W1SP3SYRM84

Dsub, Machined Hybrid, 11W1, Power (40A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 4-40 Fixed Front Screwlock with Standoff and Boardlock

L177TWA3W3SC805

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Soldercup Cable Mount, Bright Tin Shell, 3.05mm (.120in) Clear Hole

L177TWA3W3SMP2V4RRM6

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Right Angle PCB Thru Hole Mil (U.S.) Footprint, Bright Tin Shell, 0.76m (30 in) Power, P=9.52mm (0.375in), 4-40 Threaded Rear Nut, With Bracket&Boardlock

L177TWA3W3SP2Y

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA3W3SP2YFM

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, Float Mounting, Without Standoff&Boardlock

L177TWA3W3SP2YRM53

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, M3 Threaded Standoff (Panel Side) with Boardlock

L177TWA3W3SP2YRM54

Dsub, Machined Hybrid, 3W3, Power (20A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 4-40 Threaded Standoff (Panel Side) with Boardlock

L177TWA3W3SP3Y

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA3W3SP3YRM53

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, M3 Threaded Standoff (Panel Side) with Boardlock

L177TWA3W3SP3YRM54

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 4-40 Threaded Standoff (Panel Side) with Boardlock

L177TWA3W3SP3YRM84

Dsub, Machined Hybrid, 3W3, Power (40A) Contacts Only, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power, 4-40 Fixed Front Screwlock with Standoff and Boardlock

L177TWA7W2P

Dsub, Machined Hybrid, 7W2, Signal (7.5A) Contacts Only, Pin, Soldercup Cable Mount, Bright Tin Shell, 0.76m (30 in) Signal,

L177TWA7W2PP3SY

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Pin, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA7W2S

Dsub, Machined Hybrid, 7W2, Signal (7.5A) Contacts Only, Socket, Soldercup Cable Mount, Bright Tin Shell, 0.76m (30 in) Signal, 3.05mm (0.120in) Clear Hole

L177TWA7W2SEP3SV

Dsub Machined Hybrid 7W2 Coax&Signal

L177TWA7W2SFM

Dsub, Machined Hybrid, 7W2, Signal (7.5A) Contacts Only, Socket, Soldercup Cable Mount, Bright Tin Shell, 0.76m (30 in) Signal, Float Mounting

L177TWA7W2SHP2SV4RRM6

Dsub Machined Hybrid 7W2 Coax&Signal

L177TWA7W2SMP2SV4RRM6

Dsub Machined Hybrid 7W2 Coax&Signal

L177TWA7W2SMP3SV4RRM6

Dsub Machined Hybrid 7W2 Coax&Signal

L177TWA7W2SMP3SVRM6

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Socket, Right Angle PCB Thru Hole Mil (U.S.) Footprint, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, P=21.46mm (0.845in) S=8.10mm (0.319in), With...

L177TWA7W2SP2SY

Dsub, Machined Hybrid, 7W2, Power (20A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA7W2SP3SY

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 3.05mm (0.120in) Clear Hole, Without Standoff&Boardlock

L177TWA7W2SP3SYRM54

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 4-40 Threaded Standoff (Panel Side) with Boardlock

L177TWA7W2SP3SYRM84

Dsub, Machined Hybrid, 7W2, Power (40A)&Signal (7.5A) Contacts, Socket, Straight PCB Thru Hole, Bright Tin Shell, 0.76m (30 in) Power&0.76m (30 in) Signal, 4-40 Fixed Front Screwlock with Standoff and Boardlock


推存介紹
  • 關于THUNDERLINE-Z產品申明
    關于THUNDERLINE-Z產品申明 2020-10-14 15:54:05 西安市立維創展創新科技有限的公司官網，是美利堅共和國THUNDERLINE-Z & Fusite名牌在國家的授權書橋梁商，其鋁合金夾絲玻璃封閉接線端子排，已寬泛應用于航空工業、軍事化、通信系統等高穩定性層面。
  • CMD283C3超低噪聲MMIC放大器現貨庫存
    CMD283C3超低噪聲MMIC放大器現貨庫存 2025-08-22 16:41:29 Custom MMIC（現屬 Qorvo）的 CMD283C3 超高低頻嘈音 MMIC 變成器用到 3x3 mm 無引線瓷器 QFN 封裝，幾率超范圍 2 - 6 GHz，遵循高增益控制、低低頻嘈音、低耗電量等性能，采可以用在 S/C k線多各個領域。